Kenwood KAC-5001PS 1000-Watt Class D Mono Power Amplifier with LPF

#ad
KENWOOD KAC-5001PS #ad - Variable low-pass filter 50-200 Hz @ 24 Db Per Octave. 300w rms x 1 at 4ohm 500w 2ohm. Kenwood kac-5001ps 1000-watt class d mono Power Amplifier with LPF Mono Subwoofer Amplifier. Cea-2006 Compliant.

#ad



SoundBox Connected 4 Gauge Amp Kit Amplifier Install Wiring Complete 4 Ga Installation Cables 2200W

#ad
SoundBox Connected ECK4 #ad - Inline agu fuse holder w/ 80 amp AGU Fuse / Protective Black Wire Loom. Black/white triple shielded Twisted Pair RCA Interconnect: 17 Feet. Set to international standards. 4 gauge red cca copper clad aluminum power wire: 17 Feet / 4 Gauge Black CCA Copper Clad Aluminum Ground Wire: 3 Feet. Not for Resale. Wire is not awg american wire gauge.

SoundBox Connected 4 Gauge Amp Kit Amplifier Install Wiring Complete 4 Ga Installation Cables 2200W #ad - . General features:  2300 watts peak power rating complete 4 gauge amp install kit heat resistant wire jacket premium heat durability in-line agu fuse holder triple shielded rca interconnect cable premium grade cables   what's included:  4 gauge red cca copper clad aluminum power Wire: 17 Feet 4 Gauge Black CCA Copper Clad Aluminum Ground Wire: 3 Feet Black/White RCA Interconnect: 17 Feet 16 Gauge Brown/Silver Speaker Wire: 17 Feet 18 Gauge Blue Remote Wire: 18 Feet Protective Black Wire Loom Inline AGU Fuse Holder 80 Amp AGU Fuse Installation Accessories/ Connectors Terminals, Wire Ties and Wire Loom Included Authorized Internet Retailer 1 Year Manufacturer's Warranty Please Note:  Bulk Packaged.

16 gauge brown/silver speaker wire: 17 Feet / 18 Gauge Blue Remote Wire: 18 Feet. Installation accessories/ Connectors / Terminals, Wire Ties and Wire Loom Included.

#ad



Kenwood KFC-W3016PS 12-Inch 2000W Subwoofer

#ad
Kenwood KFCW3016PS #ad - 16 gauge brown/silver speaker wire: 17 Feet / 18 Gauge Blue Remote Wire: 18 Feet. 4 gauge red cca copper clad aluminum power wire: 17 Feet / 4 Gauge Black CCA Copper Clad Aluminum Ground Wire: 3 Feet. Installation accessories/ Connectors / Terminals, Wire Ties and Wire Loom Included. Black/white triple shielded Twisted Pair RCA Interconnect: 17 Feet.

Check out the kenwood kfc-w3016ps 12-inch 2000-watt subwoofer and see what a heavy-duty polypropylene cone reinforced by a tough rubber surround can do to accommodate extra-long cone excursion and rich, high-quality sound. The single 4-ohm voice coil has an 8 AWG push terminal and over-sized diaphragm. Kenwood kfcw3016ps 12" sub 2000 Watts 4ohm SVC.

Kenwood KFC-W3016PS 12-Inch 2000W Subwoofer #ad - It includes a textured polypropylene cone with rubber surround. This subwoofer will do 400 watts of RMS power and an impressive 2000 watt peak power. Inline agu fuse holder w/ 80 amp AGU Fuse / Protective Black Wire Loom. Kenwood puts decades of experience into building their Performance Series subs, so you can have powerful, reliable bass in your vehicle.

#ad



2 Kenwood KFC-W2516PS 10" 2600W Car Audio Subwoofers Subs Power Woofers 4 Ohm

#ad
KENWOOD 5864143529 #ad - Black/white triple shielded Twisted Pair RCA Interconnect: 17 Feet. And this sub handles up to 300 watts RMS each sub, so you can rock out out with plenty of thunder. Kenwood kfcw3016ps 12" sub 2000 Watts 4ohm SVC. Rms power handling : 300 Watts 600 Watt per Pair. Elastic Polymer Surround. Textured polypropylene Cone with Rubber Surround.

Peak power handling : 1, 300 Watts 2600 Watt per Pair. Check out the kfc-w2516ps 10" sub - you get a heavy-duty polypropylene cone reinforced by a tough rubber surround that accommodates the extra-long cone excursion. 1 buy = 2 subwoofers! 4 gauge red cca copper clad aluminum power wire: 17 Feet / 4 Gauge Black CCA Copper Clad Aluminum Ground Wire: 3 Feet.

2 Kenwood KFC-W2516PS 10" 2600W Car Audio Subwoofers Subs Power Woofers 4 Ohm #ad - . Kenwood puts decades of experience into building their Performance Series subs, so you can have powerful, reliable bass in your vehicle. Kenwood kfc-w2516ps 10" 2600w single 4-Ohm Car Audio Subwoofer Pair. Inline agu fuse holder w/ 80 amp AGU Fuse / Protective Black Wire Loom. Installation accessories/ Connectors / Terminals, Wire Ties and Wire Loom Included.

16 gauge brown/silver speaker wire: 17 Feet / 18 Gauge Blue Remote Wire: 18 Feet.

#ad



Kenwood Excelon KFC-XW1200F 12 1400 Watt Shallow Mount Car Subwoofer

#ad
KENWOOD KFC-XW1200F #ad - Brand new kenwood excelon kfc-xw1200f 12 1400 watt shallow mount car subwoofer 4 gauge red cca copper clad aluminum power wire: 17 Feet / 4 Gauge Black CCA Copper Clad Aluminum Ground Wire: 3 Feet. Peak power handling : 1, 300 Watts 2600 Watt per Pair. Rms power handling : 300 Watts 600 Watt per Pair. Carbon-glass fiber composite cone with butyl rubber surround.

Installation accessories/ Connectors / Terminals, Wire Ties and Wire Loom Included. Black/white triple shielded Twisted Pair RCA Interconnect: 17 Feet. Textured polypropylene Cone with Rubber Surround. 12" 4-ohm shallow-mount subwoofer. Kenwood kfc-w2516ps 10" 2600w single 4-Ohm Car Audio Subwoofer Pair. 16 gauge brown/silver speaker wire: 17 Feet / 18 Gauge Blue Remote Wire: 18 Feet.

Kenwood Excelon KFC-XW1200F 12 1400 Watt Shallow Mount Car Subwoofer #ad - Kenwood kfcw3016ps 12" sub 2000 Watts 4ohm SVC. Elastic Polymer Surround. Cast aluminum basket. Inline agu fuse holder w/ 80 amp AGU Fuse / Protective Black Wire Loom. Power range: 50-350 watts RMS.

#ad



Kenwood KFC-W2516PS 10" 4-ohm Component Subwoofer

#ad
KENWOOD KFCW2516PS #ad - Textured polypropylene Cone with Rubber Surround. Kenwood kfcw3016ps 12" sub 2000 Watts 4ohm SVC. Peak power: 1300 W. A dual ventilation system pulls heated air out of the motor structure through the back and the sides of the sub, so the inner works stay cooler during those long, loud jams. 16 gauge brown/silver speaker wire: 17 Feet / 18 Gauge Blue Remote Wire: 18 Feet.

Power range: 50-350 watts RMS. The square array pattern reinforces the cone so that it won't warp during heavy bass production. Elastic Polymer Surround. 12" 4-ohm shallow-mount subwoofer. Cast aluminum basket. To drive this single subwoofer, we recommend a mono amplifier rated between 225 and 450 watts RMS at 4 ohms.

Kenwood KFC-W2516PS 10" 4-ohm Component Subwoofer #ad - Carbon-glass fiber composite cone with butyl rubber surround. Inline agu fuse holder w/ 80 amp AGU Fuse / Protective Black Wire Loom. Kenwood kfc-w2516ps 10" 2600w single 4-Ohm Car Audio Subwoofer Pair. Peak power handling : 1, 300 Watts 2600 Watt per Pair. Performance series sub kenwood puts decades of experience into building their Performance Series subs, so you can have powerful, reliable bass in your vehicle.

4 gauge red cca copper clad aluminum power wire: 17 Feet / 4 Gauge Black CCA Copper Clad Aluminum Ground Wire: 3 Feet.

#ad



PAC SNI-35 Variable LOC Line Out Converter

#ad
PAC SNI35 #ad - 16 gauge brown/silver speaker wire: 17 Feet / 18 Gauge Blue Remote Wire: 18 Feet. Phase Adjusted. The unit maintains correct phasing and works with most factory-installed radios. Frequency response: 32Hz-300Hz. The sni-35 adjustable 2-channel line-out converter from pac audio is a line-out converter for factory radios with 2 to 50 watts per channel, accepts speaker level input and provides stereo RCA output signal for adding an aftermarket amplified audio system.

PAC SNI-35 Variable LOC Line Out Converter #ad - Rms power handling : 300 Watts 600 Watt per Pair. Textured polypropylene Cone with Rubber Surround. Cast aluminum basket. The transformer isolated for optimal sound and performance. Mounting depth: 4-9/16inch. Installation accessories/ Connectors / Terminals, Wire Ties and Wire Loom Included. Use the sni-35 when adding an amplifier to a factory radio to convert the radio's speaker level output to the lower amplifier RCA level input.

Power range: 50-350 watts RMS. It allows 50 watts maximum input per channel and has a linear 20Hz to 20, 000Hz output based on input signal. Peak power handling : 1, 300 Watts 2600 Watt per Pair. Kenwood kfcw3016ps 12" sub 2000 Watts 4ohm SVC.

#ad



InstallGear 4 Gauge Complete Amp Kit Amplifier Installation Wiring Wire

#ad
InstallGear IG4AKR #ad - 12" 4-ohm shallow-mount subwoofer. Carbon-glass fiber composite cone with butyl rubber surround. Mounting depth: 4-9/16inch. Adjustable Line Output Converter. Black/white triple shielded Twisted Pair RCA Interconnect: 17 Feet. Inline agu fuse holder w/ 80 amp AGU Fuse / Protective Black Wire Loom. Subwoofer type: 10" PP Cone.

InstallGear 4 Gauge Complete Amp Kit Amplifier Installation Wiring Wire #ad - 5 db linearity from 20 - 20, 000 Hz. Elastic Polymer Surround. Rms power: 300 W. 17ft red soft touch 4 Gauge CCA Power Cable. Peak power handling : 1, 300 Watts 2600 Watt per Pair. Kenwood kfc-w2516ps 10" 2600w single 4-Ohm Car Audio Subwoofer Pair. Cast aluminum basket. Installation accessories/ Connectors / Terminals, Wire Ties and Wire Loom Included.

Peak power: 1300 W. Utilize audio Transformer for Noise Isolation. 3ft black soft touch 4 Gauge CCA Ground Cable. Rms power handling : 300 Watts 600 Watt per Pair. 17ft soft touch 2-Channel RCA Cable. 16 gauge brown/silver speaker wire: 17 Feet / 18 Gauge Blue Remote Wire: 18 Feet.

#ad



BOSS Audio KIT10 4 Gauge Amplifier Installation Wiring Kit - A Car Amplifier Wiring Kit Helps You Make Connections and Brings Power to Your Radio, Subwoofers and Speakers

#ad
BOSS AUDIO KIT-10 #ad - Rms power: 300 W. 12" 4-ohm shallow-mount subwoofer. Inline agu fuse holder w/ 80 amp AGU Fuse / Protective Black Wire Loom. Anl fuse holder with 100A Fuse. Phase Adjusted. 16 gauge brown/silver speaker wire: 17 Feet / 18 Gauge Blue Remote Wire: 18 Feet. 20 4" wire ties, 4 Rubber Grommets. 5 db linearity from 20 - 20, 000 Hz.

Boss audio kit10 4 gauge amplifier installation wiring kit – power cable, fuse holder, gold-plated ring terminals, wire ties, rca interconnect, AGU Fuse, Remote Turn-on Wire, Ground Cable, Split Loon Tubing, Speaker Wire, Rubber Grommets, Gold-plated Speaker Terminal 4 gauge red cca copper clad aluminum power wire: 17 Feet / 4 Gauge Black CCA Copper Clad Aluminum Ground Wire: 3 Feet.

BOSS Audio KIT10 4 Gauge Amplifier Installation Wiring Kit - A Car Amplifier Wiring Kit Helps You Make Connections and Brings Power to Your Radio, Subwoofers and Speakers #ad - 5/16" gold-plated ring terminals, 1/4" Gold-Plated Ring Terminal, 4 Gold-Plated Speaker Terminals. Kenwood kfcw3016ps 12" sub 2000 Watts 4ohm SVC. 17 foot high performance rcA Interconnect Cable, 6 Foot Split Loom Tubing. Adjustable Line Output Converter. Frequency response: 32Hz-300Hz. Power range: 50-350 watts RMS.

Installation accessories/ Connectors / Terminals, Wire Ties and Wire Loom Included. 17ft soft touch 2-Channel RCA Cable.

#ad



KnuKonceptz KCA Complete 4 Gauge Amp Installation Kit

#ad
KnuKonceptz KCA-K4 #ad - Textured polypropylene Cone with Rubber Surround. 44mm^2 of copper clad aluminum CCA to transfer current from your battery to amplifier. Adjustable Line Output Converter. Installation accessories/ Connectors / Terminals, Wire Ties and Wire Loom Included. Use the sni-35 when adding an amplifier to a factory radio to convert the radio's speaker level output to the lower amplifier RCA level input.

Copper clad aluminum cca is made up of 90% Aluminum and 10% Copper. Its physically impossible for these kits to support this load refer to our comparison photo How many watts can this amp kit handle? At KnuKonceptz, we do not use "watts" to rate our amp kits. Rms power handling : 300 Watts 600 Watt per Pair.

KnuKonceptz KCA Complete 4 Gauge Amp Installation Kit #ad - Phase Adjusted. Rms power: 300 W. One 17 foot black bassik rca Cable made from Oxygen Free Copper OFC. Inline agu fuse holder w/ 80 amp AGU Fuse / Protective Black Wire Loom. 12" 4-ohm shallow-mount subwoofer. The pvc outer jacket can withstand extreme temperatures -40 to 105 C. 4 gauge red cca copper clad aluminum power wire: 17 Feet / 4 Gauge Black CCA Copper Clad Aluminum Ground Wire: 3 Feet.

Kenwood kfcw3016ps 12" sub 2000 Watts 4ohm SVC.

#ad



BBox E12SV Single 12" Vented Carpeted Subwoofer Enclosure

#ad
ATREND E12SV #ad - Ft. One 17 foot black bassik rca Cable made from Oxygen Free Copper OFC. Phase Adjusted. 5/16" gold-plated ring terminals, 1/4" Gold-Plated Ring Terminal, 4 Gold-Plated Speaker Terminals. 20 4" wire ties, 4 Rubber Grommets. Ft. 1. 15 tuning 35hz Speaker hole cutout 11. 12"" speaker face is 1. 00"" body is 5/8"" extra large terminals cups wire will be needed to run from the speaker to the terminal cup tabs IMPORTANT:Confirm the required speaker hole cutout is no more than 11.

12"". 17ft red soft touch 4 Gauge CCA Power Cable. Peak power handling : 1, 300 Watts 2600 Watt per Pair. Inline agu fuse holder w/ 80 amp AGU Fuse / Protective Black Wire Loom. Carbon-glass fiber composite cone with butyl rubber surround. Kenwood kfcw3016ps 12" sub 2000 Watts 4ohm SVC. Cutout diameter - 11. 125". 3ft black soft touch 4 Gauge CCA Ground Cable.

BBox E12SV Single 12" Vented Carpeted Subwoofer Enclosure #ad - Adjustable Line Output Converter. One inline fuse holder with 80A AGU Fuse.

#ad