As an Amazon Associate I earn from qualifying purchases.
1. TCMMRC #ad
TCMMRC FC F4 Flight Controller with Brushless ESC 30A 4 in 1 BL_S 2-5S Dshot600 for Drones Racing Quadcopter 30.5X30.5 mmF4-30A Stack #adTCMMRC #ad
- It is mini new compact and concentrated into a two-layer tower structure. There is no need to solder tiny wires. Unique design 〗: 2-5s mini flight tower is specially designed for mini FPV racers.
It supports 2-5S Lipo Input. Advanced 〗: mini f4 flight control has been optimized overall. Micro f4 flight control has been optimized overall. The built-in osd chip helps to monitor the status of the flight data at any time.
Latest features 〗: the mini fc and esc neatly stack together and highly integrated with all the latest features. Professional 〗: 2-5s blheli_s esc supports dshot dshot150/300/600 It has optimized internal circuitry, which makes your build easy to assemble and it has a cleaner look. Easy to use 〗: the mini fc and esc are plug-and-Play.
|Part Number||US-F4-30A Stack|
2. iFlight #ad
IFlight SucceX-E 45A BLHeli_S 4-in-1 ESC 2-6s Electronic Speed Controller Support DSHOT600 for FPV Racing Drone Quadcopter #adiFlight #ad
- Standard 305*305 Φ3mm mounting holes; Vibration and shocks can be perfectly avoided by adding dampers. The stm32f051 is combined with high-performance 3-in-1 driver. 6s esc support dshot up to 600, support: dshot150/300/600/MultiShot/OneShot; support 2-6S Lipo Input.
The design of succex-e 45a blheli_s dshot600 4in1 esc based on SucceX ESC, was designed to give your motors smooth power with great stability and durability, more affordable. Rational layout design with extended solder pads ensures easy builds, fixes or adjustments.
3. Hobbywing #ad
Combo Xrotor 4in1 ESC Micro 4in1 ESC&FCBL32/F4-G3 #adHobbywing #ad
- Volt/amp monitoring port allows users to check the battery voltage BAT port and current CRT port, SPEKTRUM1024/2048, extra current meter is needed. Combo xrotor 4in1 esc micro 4in1 esc&fcbl32/f4-g3 SKU:38040302. Board load 12v bec, the output current can reach 2a.
Buzzer output port allows users to connect external buzzers to the FC for warning or informing the flight status of the aircraft. It can supply power for graphic transmission, 12V LED lamp and other equipments.
The spi icm-20602 which integrates accelerometer and gyro with the running frequency can be set to 32KHz is adopted. Led strip signal output port allows users to adjust the color & flash mode of the LED strip via the FC.
Compatible with various receivers like sbus, sumd, sumh, xbus, ppm and etc. Compatible with DJI AIR UNIT. The spi icm-20602 which integrates accelerometer and gyro with the running frequency can be set to 32KHz is adopted. It can supply power for graphic transmission, 12V LED lamp and other equipments. Board load 12v bec, the output current can reach 2a.
4. iFlight #ad
IFlight SucceX-E 2-6S Mini Flight Stack F4 Flight Controller MPU6000 + 4 in 1 35A ESC BLHeli_S for FPV Racing Drone Quadcopter #adiFlight #ad
- The mini fc and esc plug-and-Play, no need to solder tiny wires. The mini fc and esc neatly stack together, optimized internal circuitry, highly integrated with all the latest features, make your build easy to assemble and cleaner looking.
2-6s blheli_s esc support dshot dshot150/300/600/multiShot/ OneShot etc; support 2-6S Lipo Input.
Succex-e 2-6s mini f4 tower is specially designed for mimi FPV racers, mini new compact and concentrated into a two-layer tower structure. Mini f4 flight control has been optimized overall. The built-in osd chip helps to monitor the status of the flight data any time; 8mb blackbox and a powerful F4 processor to run it all.
5. TCMMRC #ad
TCMMRC 2-6s Mini Flight Tower System F4129 Flight Controller MPU6000+ 4 in 1 30A ESC BLHeli_S for FPV Racing Drone Quadcopter #adTCMMRC #ad
- Latest features 〗: the mini fc and esc neatly stack together and highly integrated with all the latest features. It supports 2-6S Lipo Input. Micro f4 flight control has been optimized overall.
It is mini new compact and concentrated into a two-layer tower structure. Advanced 〗: mini f4 flight control has been optimized overall. The built-in osd chip helps to monitor the status of the flight data at any time.
Unique design 〗: 2-6s mini flight tower is specially designed for mini FPV racers. Easy to use 〗: the mini fc and esc are plug-and-Play. Professional 〗: 2-6s blheli_s esc supports dshot dshot150/300/600 There is no need to solder tiny wires. It has optimized internal circuitry, which makes your build easy to assemble and it has a cleaner look.
6. iFlight #ad
IFlight SucceX-D Mini F7 TwinG Stack Mini F7 TwinG FC with SucceX 40A BLHeli_32 4-in-1 ESC Compatible for DJI Air Unit #adiFlight #ad
- Package included? -succex-d mini f7 twing fc x 1 -succex 40a blheli_32 4-in-1 esc x 1 - compatible harness cable x 1 -Stack mounting screws and dumpers and nuts, cable NOTE:The stack is not included Air Unit compatible for DJI.
Supports blheli pass-through for easy ESC upgrade and configuration. Universal usb type C connector instead of micro USB. Designed to support Digital FPV compatible for DJI. No need to solder tiny wires. Plug-and-play.
7. BETAFPV #ad
BETAFPV Upgraded F405 V2 FC 4S Brushless Flight Controller and BLHeli_32 16A ESC OSD Smart Audio No Receiver with XT30 Cable for Brushless Beta85X Micro Quadcopter Cine Whoop Drone #adBETAFPV #ad
- Blheli_32 16a escblheli_32 is the 3rd generation esc firmware after blheli and blheli_s, which is written for ESC's that utilize 32-bit MCU. It is dual mosfets on the original BLHeli_32 ESC board. The details of soldering receiver please refer to the pictures on the left. Please notethe f405 v2 fc blheli_32 16a esc is without receiver, don't forget to plug the battery, all the ports are available on this board.
Upgraded of escusing single n-channel mosfets on esc board, which has a lower inner resistance. Current sensor included. F405 v2 fcf405 v2 fc upgraded the connection mode with accessories, vtx and led board, added 4 extra pluggable ports for ESC, no need to solder, RX, which is convenient for installation and decreasing the dislocated PIN mounting.
When you connect the receiver to this F4 V2 FC, otherwise the receiver will have no power to work at all.
Totally supports 4S POWER with a steady performance. With the increase in processing power, faster input signals with lower latency and higher update rate would be possible in BLHeli_32, such as Dshot1200 Support 4s powerthe greatest combination of f405 v2 fc with blheli_32 16a esC built-in BetaFlight OSD is customized for Cine whoop drone Beta85X. Power cable increases electrolytic capacitance, reducing the high voltage damage to the electronic components during the power-on, and functions as a circuit protection.
8. TCMMRC #ad
TCMM F4 Flight Controller OSD & 20A Blheli_S 2-4S DSHOT600 Brushless ESC for RC Drone FPV Racing 20x20mm #adTCMMRC #ad
- 20a esc& flight control-this esc is very easy to solder, and the flight control has multiple ports, no soldering, just plug in the port line. This is convenient for beginners.
Product parameter-size:29*31*15mm, pitch:20*20mm；suitable for 2~4 inch Frame Drone Kit. Project name-item name:f4 flight controller；mcu: stm32f411；firmware: matekf411；gyro: icm20602；support Receiver: PPM, SBUS；OSD: YES；BEC: 5V.
Project name-item name: 4 in 1 20a blheli_s esc；continuous current: 20a； peak current: 25a 10s；bec output: no；input voltage: 2-4s；main control chip: 48mhz EFM8BB2；Firmware upgrade: Supports Dshot600/BLHeli_S/Oneshot125；MOS: 3*3；MOS type: vs3610ae 30v64a. Customer first-if the esc flight control is due to quality problems, please contact us in time and we will solve it for you.
9. HGLRC #ad
HGLRC T-Rex 35A Brushless ESC BLheli_32 3S -5S 6S Electronic Speed Controller Dshot1200 for FPV FC Flight Controller RC Racing Drone Quadcopter 4PCS #adHGLRC #ad
- Support protocol:dshot1200/dshot600/300/150/oneshot125/42, MultiShotDamped mode, forward and reverse turn. 35a improved firmware blheli_32 a good choice for fpv racer. Package included 4pcs 35a Brushless ESC BLheli_32.
Ultra light weight only 6. 4g suitable for mini indoor or outdoor racing drone RC quadcopter. Support 3s - 6s 3s 4s 5s 6s lipo battery input voltage with constant current 35A NOT including battery. Mini size 27*15mm, original parts for Flytower Flight Controller, compact size For Mini FPV Racing drone.
10. LongBowRC #ad
Zeez F7 FPV Drone Flight Controller Stack F7 FC + 45A BLHeli32 ESC Stack, Zeez Design #adLongBowRC #ad
- 3s to 6s input. Constant Current: 45A. 6 available UARTS. Direct solder connection and board space for TBS Nano RX and TBS Unify Pro32 Nano providing the ultimate in clean stack installation. Usb type C connector.