Top 10 Traxxas Summit Parts – RC Vehicle Bodies & Scale Accessories

As an Amazon Associate I earn from qualifying purchases.

1. Traxxas

#ad

Assembled with Glued Boots pair, Traxxas 5655 Half Shaft Set

#ad
Traxxas #ad - Comes as a pair. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles! This product is made from high quality materials, and designed for lasting performance.

This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. This product is made from high quality materials and designed for long-lasting performance. This is for use on rc vehicles such as the Traxxas Summit, consult your user's manual for exact parts listings.
BrandTraxxas #ad
ManufacturerTraxxas #ad
Height8.38 Inches
Length3.25 Inches
Weight0.02 Pounds
Width0.75 Inches
Part Number5655
ModelTRA5655
WarrantyNo Warranty

2. Traxxas

#ad

Traxxas 5650R Steel Constant-Velocity Center Driveshafts

#ad
Traxxas #ad - Nickel plated steel shafts, blue silicone boots, and red-anodized aluminum accents are designed for ultimate strength and performance. U-joint pins are held captive by a lightweight aluminum sleeve so you never have to worry about losing a pin. Inner and outer u-joints are lubricated and sealed by a rubber boot for maximum protection against the elements. Complete kit includes front and rear driveshafts, ready to install. Designed to handle the extreme horsepower and torque that Summit, E-Revo, and E-Revo Brushless Edition dish out.
BrandTraxxas #ad
ManufacturerTraxxas #ad
Height3.19 Inches
Length8.88 Inches
Weight0.25 Pounds
Width1.13 Inches
Part Number5650R
ModelTRA5650R
WarrantyNo Warranty

3. Traxxas

#ad

Traxxas 5632 Rear Chassis Brace 1/10 Summit, E-Revo

#ad
Traxxas #ad - Includes mounting screws. Fits 1/10 scale E-Revo and Summit. Strengthens rear chassis for massive jumps. Use traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. Brilliant blue-anodized aluminum.
BrandTraxxas #ad
ManufacturerTraxxas #ad
Height5 Inches
Length12 Inches
Weight0.02 Pounds
Width12 Inches
Part Number5632
Model5632
WarrantyNo Warranty

4. Traxxas

#ad

Traxxas 5675 Titan 775 Motor 10-Turn 16.8 Volts

#ad
Traxxas #ad - Equipped with a fan-cooled five-pole armature for non-stop off-road adventure delivering superior torque and smoothness. More torque to tame the trail and conquer any climb. The largest high-torque brushed motor offered by Traxxas. Features an extra wrap of steel around the can for maximum magnetic field strength. Heavy-duty 5mm output shaft.
BrandTraxxas #ad
ManufacturerTraxxas #ad
Height5 Inches
Length7.75 Inches
Weight0.88 Pounds
Width1.63 Inches
Part Number5675
ModelTRA5675
WarrantyNo Warranty

5. Atomik

#ad

Replaces Traxxas Part 5337, Atomik RC Alloy Front Skid Plate, Grey fits The Traxxas 1/10 E-Revo and Other Traxxas Models

#ad
Atomik #ad - Atomik rc offers a full line of hop Ups for your Traxxas Model, Red, Available in Blue, and Gunmetal. Replaces traxxas Part 5337. Hardened billet 6061 Aluminum for Lightweight and Durable Performance. Easy upgrade from original Part. Also fits: traxxas revo 3. 3, 1/10 summit, 1/10 revo, 1/10 Slayer 4X4. Precision cnc machined for Factory Spec Fitment.
BrandAtomik #ad
ManufacturerAtomik RC #ad
Height1 Inches
Length1 Inches
Weight0.15 Pounds
Width1 Inches
Part Number4038GM
Model4038GM
WarrantyAtomik RC warrants all products to be free of material and workmanship defects for a period of 30 days from date of purchase for all electronic components and 90 days for all non-electronic components. If a component is defective or was not correctly made, Venom will, at its sole discretion, repair or replace the item free of charge. This is a non-transferable warranty and does not cover normal wear and tear, crash or water damage, modifications, failure to perform routine maintenance, or any damages arising as a result of improper use.

6. Traxxas

#ad

Traxxas 5635 Summit Front Bumper and Bumper Mount

#ad
Traxxas #ad - This product is made from high quality materials and designed for lasting performance. Made using only the highest quality components. Innovative design and engineering. The number one selling name ins RTR. This is for use on rC vehicles, consult your user's manual for exact parts listings. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles.
BrandTraxxas #ad
ManufacturerTraxxas #ad
Height9.38 Inches
Length4.88 Inches
Weight0.12 Pounds
Width1.25 Inches
Part Number5635
ModelTRA5635
WarrantyNo Warranty

7. Traxxas

#ad

Traxxas 7274 Canyon AT 2.2" Tires Pre-Glued on Chrome Geode Blue Beadlock-Style Wheels pair

#ad
Traxxas #ad - Made using only the highest quality components. This product is made from high quality materials and designed for lasting performance. The number one selling name ins RTR. This is for use on rc vehicles such as the Traxxas 1/16 Summit; consult your user's manual for exact parts listings. Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. Innovative design and engineering.
BrandTraxxas #ad
ManufacturerTraxxas #ad
Height451 Inches
Length3.57 Inches
Weight0.44 Pounds
Width0.57 Inches
Part Number7274
ModelTRA7274
WarrantyNo Warranty

8. Traxxas

#ad

1/16 Summit, Traxxas 7235 Front and Rear Bumpers and Mounts

#ad
Traxxas #ad - Use traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles. This product is made from high quality materials and designed for lasting performance. This is for use on rc vehicles such as the Traxxas ; consult your user's manual for exact parts listings.
BrandTraxxas #ad
ManufacturerTraxxas #ad
Height7.88 Inches
Length4.63 Inches
Weight0.05 Pounds
Width1 Inches
Part Number7235
ModelTRA7235
WarrantyNo Warranty

9. CrazyRacer

#ad

CrazyRacer Front and Rear Aluminum Steering Block Knuckle Arm with Rubber Shielded Bearings -4PCS Set Blue for Traxxas 1/10 Old E-REVO EREVO Summit E-MAXX T-MAXX3.3 Slayer Pro 4X4 5334R

#ad
CrazyRacer #ad - Will fit :1/10 old e-revo summit e-maxx 5334r not fit New E-Revo 2. 0 . What you see in the main picture is what you will receive. Order will be processed and shipped in 1-3 business days, shipping by China Post, usually takes 7-30 business days to arrive worldwide. Material:6061T6 Aluminum. Shipping rates: price brands usd0 to 15 price per order is usd4;price brands usd15. 01 to 25 price per order is usD2;Price Brands Over USD25. 01 price per order is FREE.
BrandCrazyRacer #ad
ManufacturerCrazyRacer #ad
Weight0.27 Pounds

10. HobbyCrawler

#ad

4pcs Machined Front/Rear Aluminum Suspension Control A Arms L/R for 1/10 Traxxas Slash 4WD Stampede 4x4 5807 Upgrade Parts Red

#ad
HobbyCrawler #ad - Pack of 4 as the picture showed, Accessories Included. Made of quality aluminum Alloy, Easy upgrade from the original part. Rc hobby model car 1/10 traxxas slash 5807 Upgraded Hop-up Parts upgrade part parts replace replacement. Cnc machined for precision. Increased strength and precision.
BrandHobbyCrawler #ad
ManufacturerHobbyCrawler #ad
Weight0.26 Pounds
Part NumberACSLA007R